Product Finder for HILMA Machine Vises and Tower Clamping Systems
Filter HILMA clamping systems by series, jaw width, clamping principle and technical characteristics
With the HILMA Product Finder, you can quickly identify the right machine vise or tower clamping system for your workpiece clamping application. Filter products by product category, series, jaw width or clamping principle and compare key technical parameters such as clamping force, clamping range or base length. You can also select different jaw types and additional features to find the best solution for your machining task.
Each catalog product provides access to technical product data, product catalogs, operating manuals and CAD models. The Product Finder is continuously expanding and additional series, vises, jaws and accessories are regularly being added. If a specific series is not yet listed, please contact us and we will support you in selecting the right clamping solution.
Clamping claws M12, H=14 mm
937772061
Nuts for T-slots, DIN 508, M10, B=12 mm
937773002
Nuts for T-slots, DIN 508, M10, B=14 mm
937773003
Torque wrench 5-60 NM
937926600
Torque wrench 20-120 Nm
937926610
Torque wrench 40-200 Nm
937926620
Positioning pins for elevation HILMA.MCP 60
939200101
Positioning pin set
939200103
Retractable nipple set STARK.metec.1 for quick-change block HILMA.MCP 60
939200201
Retractable nipple set STARK.metec.2 for quick-change block HILMA.MCP 100
939200202
Retractable nipple set STARK.metec.2 for quick-change block HILMA.MCP 125
939200203
Machine vise HILMA.MCP 60.170 fixed jaw
945830102
Machine vise HILMA.MCP 60.170 concentric
945830302
Machine vise HILMA.MCP 60.170 concentric, hydraulic
945830401
Machine vise HILMA.MCP 60.170 balance clamping
945830702
Low step reversible jaw for 60 mm interchangeable insert - HILMA.MCP 60
945836901 For insert
High step reversible jaw for 60 mm interchangeable insert - HILMA.MCP 60
945836902 For insert
Offset step reversible jaw for 35 mm interchangeable insert - HILMA.MCP 60
945836903 For insert
Prism jaw with interchangeable insert diameter 10-76 mm - HILMA.MCP 60
945836921 For insert
Stepped reversible jaw hardened and ground - HILMA.MCP 60
945836931 Hardened, ground
Clamping jaw, unmachined - HILMA.MCP 60
945836932 Unmachined
Machine vise HILMA.MCP 100.260 fixed jaw
945850102
Machine vise HILMA.MCP 100.260 concentric
945850302
Machine vise HILMA.MCP 100.266 concentric, hydraulic
945850401