Clamping element STARK.airtec D100, Module Tornado
Product description
Clamping element STARK.airtec D100, module Tornado
Fast closing clamp made from high-quality tool steel. System is pneumatic single-acting (clamping via spring force). design in module design Ø 100 mm with blow-out over 3 support islands (Ø 8.1 mm).
Features:
- design: module
- version: Tornado
- disc shape: round
- function: with zero point
- operating principle: single-acting
- actuation: pneumatic
- diameter: 100 mm
- maintenance cycle: 2,000,000 cycles
- retention force: 55,000 N
- max. operating pressure: 10 bar
- min. release pressure: 5 bar
- lateral forces: 7,000 N
- air volume: 19 cm³
- min. allowable clamping time: sec
- min. allowable release time: sec
- radial pre-positioning: mm
- max. axial pre-positioning: on support
- repeat accuracy: < 0.005 mm
- system accuracy: < 0.01 mm
- operating temperature: + 10°C to + 80°C
- weight: approx. 1.2 kg
Scope of delivery:
- 1× fast closing clamp
- 8× fixing screw M5 × 14 mm (S931-003)
- 8× screw cover (S055-146-01)
- 1× o-ring Ø 8 × 2 mm (S933-066)
Documents:
- catalogue: WM-020-288
- installation according to datasheet: D088
- operating manual: WM-020-168
Fast closing clamp made from high-quality tool steel. System is pneumatic single-acting (clamping via spring force). design in module design Ø 100 mm with blow-out over 3 support islands (Ø 8.1 mm).
Features:
- design: module
- version: Tornado
- disc shape: round
- function: with zero point
- operating principle: single-acting
- actuation: pneumatic
- diameter: 100 mm
- maintenance cycle: 2,000,000 cycles
- retention force: 55,000 N
- max. operating pressure: 10 bar
- min. release pressure: 5 bar
- lateral forces: 7,000 N
- air volume: 19 cm³
- min. allowable clamping time: sec
- min. allowable release time: sec
- radial pre-positioning: mm
- max. axial pre-positioning: on support
- repeat accuracy: < 0.005 mm
- system accuracy: < 0.01 mm
- operating temperature: + 10°C to + 80°C
- weight: approx. 1.2 kg
Scope of delivery:
- 1× fast closing clamp
- 8× fixing screw M5 × 14 mm (S931-003)
- 8× screw cover (S055-146-01)
- 1× o-ring Ø 8 × 2 mm (S933-066)
Documents:
- catalogue: WM-020-288
- installation according to datasheet: D088
- operating manual: WM-020-168
