Set STARK.connect.M without centring including Y-cable
Product description
Set STARK.connect.M without centring incl. Y-cable
Delivery set consisting of fast closing clamp STARK.connect.M without centring (S9000-003), pre-assembled angle connectors (S953-419) as well as a Y-cable for connecting two M12 sensor cable (S958-153)
Features:
- design: module
- version: Standard
- disc shape: square
- function: without centring
- operating principle: single-acting
- actuation: pneumatic
- edge length: 95 mm
- maintenance cycle: 2,000,000 cycles
- insertion force: 1,200 N
- insertion force at 5 bar (20 bar) clamping pressure / released: N
- retention force: 10,000 N
- lifting force at 5 bar: 500 N
- lift: 1.5 mm
- retraction: 4.5 mm
- max. operating pressure: bar
- min. release pressure: 5 bar
- air volume: 64 cm³
- min. allowable clamping time: sec
- min. allowable release time: sec
- radial pre-positioning: mm
- max. axial pre-positioning: - 3 mm
- max. loading angle: 1.5°
- repeat accuracy: < 0.05 mm
- system accuracy: < 0.1 mm
- operating temperature: + 10°C to + 80°C
- weight: approx. 1.9 kg
- pneumatic connection M5
- electrical connection M12 4-pin
- voltage range: 24 (18 to 34) V DC
- typical current draw: 25 mA
- max. continuous current per output: 200 mA
- reverse polarity protection
Additional features:
- optional pneumatic clamping force reinforcement
Scope of delivery:
- 1× fast closing clamp STARK.connect.M OZ
- 1× y-cable for connecting two M12 sensor cable (S958-153)
- 4× fixing screw M8 × 20 mm (S931-978-02)
Documents:
- catalogue: WM-020-418
- installation according to datasheet: D169
- operating manual: WM-020-417
Delivery set consisting of fast closing clamp STARK.connect.M without centring (S9000-003), pre-assembled angle connectors (S953-419) as well as a Y-cable for connecting two M12 sensor cable (S958-153)
Features:
- design: module
- version: Standard
- disc shape: square
- function: without centring
- operating principle: single-acting
- actuation: pneumatic
- edge length: 95 mm
- maintenance cycle: 2,000,000 cycles
- insertion force: 1,200 N
- insertion force at 5 bar (20 bar) clamping pressure / released: N
- retention force: 10,000 N
- lifting force at 5 bar: 500 N
- lift: 1.5 mm
- retraction: 4.5 mm
- max. operating pressure: bar
- min. release pressure: 5 bar
- air volume: 64 cm³
- min. allowable clamping time: sec
- min. allowable release time: sec
- radial pre-positioning: mm
- max. axial pre-positioning: - 3 mm
- max. loading angle: 1.5°
- repeat accuracy: < 0.05 mm
- system accuracy: < 0.1 mm
- operating temperature: + 10°C to + 80°C
- weight: approx. 1.9 kg
- pneumatic connection M5
- electrical connection M12 4-pin
- voltage range: 24 (18 to 34) V DC
- typical current draw: 25 mA
- max. continuous current per output: 200 mA
- reverse polarity protection
Additional features:
- optional pneumatic clamping force reinforcement
Scope of delivery:
- 1× fast closing clamp STARK.connect.M OZ
- 1× y-cable for connecting two M12 sensor cable (S958-153)
- 4× fixing screw M8 × 20 mm (S931-978-02)
Documents:
- catalogue: WM-020-418
- installation according to datasheet: D169
- operating manual: WM-020-417
